How To Install Neon Light

The fluorescent tube, which is commonly called “neon” because of the gas it contains, is easily installed in a few minutes.

The fluorescent tube, which is commonly called “Custom neons” because of the gas it contains, is easily installed in a few minutes. Remember to cut off the power to the electrical circuit before starting installation work, to avoid any risk of electric shock.

Neon, a tool for lighting and decoration today, neon offers the same luminous comfort as conventional lighting, while being endowed with a longer lifespan. They ideally find their place on ceiling lights. However, they can also be used for decorative purposes. The multiple colors available allow certain creativity in terms of layout, in particular to highlight the furniture thanks to the shadows.

The color of the neon comes from the gas contained in the inside the tube, mainly a mixture of mercury, argon and neon. Mercury being a toxic gas, it is important not to throw neon at the end of its life in nature or in household waste. All used neon should be returned to a DIY store or furniture store. The installation of a fluorescent tube of the neon type Neon is mounted on a strip, which will itself be fixed to the ceiling or to the wall. Place the ruler in the desired location, and mark the fixing holes with an erasable pencil.

Then drill the wall with all used neon should be returned to a DIY store or furniture store. The installation of a fluorescent tube of the neon type Neon is mounted on a strip, which will itself be fixed to the ceiling or to the wall. Place the ruler in the desired location, and mark the fixing holes with an erasable pencil. Then drill the wall with all used neon should be returned to a DIY store or furniture store. The installation of a fluorescent tube of the neon type Neon is mounted on a strip, which will itself be fixed to the ceiling or to the wall. Place the ruler in the desired location, and mark the fixing holes with an erasable pencil.

Then drill the wall with electric drill, peg the holes and screw the ruler. Then, connect the power wires of the electrical circuit to the connectors on the strip. For its proper functioning, neon requires two electronic devices: the transformer and the starter. The first allows controlling the intensity of the current in the circuit, while the second has a switch function. These elements are provided in the packaging and must be placed on the strip in the places provided for this purpose. To finish, place the neon tube in the strip, and turn it a quarter of a turn to fix it, and then test the installation by restoring the current.

https://www.customneoncenter.com/

 


Leave a Reply

Your email address will not be published. Required fields are marked *